Reference   Language | Libraries | Comparison | Changes

Ethernet : Client class

Client()

Description

Creates a client which can connect to the specified internet IP address and port.

Syntax

Client(ip, port)

Parameters

ip: the IP address that the client will connect to (array of 4 bytes)

port: the port that the client will connect to (int)

Example

#include <Ethernet.h>

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
byte ip[] = { 10, 0, 0, 177 };
byte server[] = { 64, 233, 187, 99 }; // Google

Client client(server, 80);

void setup()
{
  Ethernet.begin(mac, ip);
  Serial.begin(9600);

  delay(1000);

  Serial.println("connecting...");

  if (client.connect()) {
    Serial.println("connected");
    client.println("GET /search?q=arduino HTTP/1.0");
    client.println();
  } else {
    Serial.println("connection failed");
  }
}

void loop()
{
  if (client.available()) {
    char c = client.read();
    Serial.print(c);
  }

  if (!client.connected()) {
    Serial.println();
    Serial.println("disconnecting.");
    client.stop();
    for(;;)
      ;
  }
}

Reference Home

Corrections, suggestions, and new documentation should be posted to the Forum.

This reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License and is based on the Arduino reference. Code samples in the reference are released into the public domain.